Release Liner

Griff Paper and Film Logo

Contact an Expert

English Hindi Japanese Portuguese Spanish

Download Product Sheet

Release Liner

Release Liner

Griff’s Release Liners are designed to not only release the stress of adhesive paper or tape but to release the stress our clients have of monitoring quality control. Following hours of research and development along with industry standard testing, we have reached a result that can be customized for thousands of different applications.

This specific series of release liners has a very low transfer and low extractable release coatings that offer a consistent release. All of the release coatings are formulated without solvents and polymerized using Green Technology. These products are manufactured in a climate controlled facility that is ISO 9001:2008 certified to maintain the highest level of quality.

  • Smooth Even Peel
  • Custom Formulations
  • Low Carbon Footprint

C Release is our standard line for most tape and label applications.

Premium Release Line (CF) offers superior release that is very smooth. CF Release is great for aggressive adhesives and hotmelts, high gloss casting sheets, and rubber based.

BC Release covers the most aggressive adhesives, hybrids, bitumens, and tars used extensively in the Building and Construction industry.

Fluorosilicone liners (FS) for use with silicone based adhesives.

Base Materials

Griff Release coatings are available on a wide variety of base papers, polycoated papers, glassine, SCK, and clay coated. Plastic films include PET, PP, PE.

Shelf Life

Griff Paper and Film recommends usage of the liner within six (6) months of receipt, stored in original packaging in controlled climate. Due to the high variety of applications, the lifetime depends on specifics of the application and should be fully tested. Confirmation of shelf life should be performed after processing.

Test Results:

BC-Line Release Range Application
BC10 1-15 PSA/Hybrid Acrylics
BC11 1-15 Asphaltic/Bitumens
BC12 15-30 Asphaltic/Bitumens
Premium (CF Line) Release Range
CF1 1-20
CF2 20-50
CF3 50+
Standard C Line Release Range
C1 1-15
C3 15-30
C5 30-60
C7 60-90
C9 100+

*Release test is measured in average grams per inch; 15 minutes dwell time, 180° pull @ 200 inches per minute using Tesa 7475 Tape.*

The information presented in this data sheet is believed to be accurate and is not intended to constitute a specification. The values given reflect average measurements, which can vary slightly. Users are encouraged to determine the suitability of this product for their own particular application(s).

Search all of our content:

Quick Contact

Fill out this form to be contacted by a Griff Representative


Ask The Experts

The Griff Network
Office(215) 428-1075
Toll Free: (800) 872-7549

Discover How Griff Can Work For You

Company Overview